- Brand: Casual
- Product Code: Product 8
- Reward Points: 800
- Availability: Out Of Stock
- Ex Tax: $49.90
Utilizes one Cree XPL-HI LED chip
Maximum output up to 1350 ANSI lumens
Highly efficient circuit design offers maximum output and runtime
Multi-function clicky side switch with momentary activation and on/off
Memory function to remember last output setting used (except hidden modes)
Advanced thermal protection circuit prevents overheating
Light orange peel reflector creates great throw distance and beam pattern
Aircraft grade aluminum, mil-spec hard anodized for maximum wear
Toughened ultra-clear tempered glass lens with anti-reflective coating
Large copper heat sink pad for superior thermal conductivity
LED indicator turns red to alert user ti switch lower output mode and recharge batteries in time
Light output / runtime
Mode 1 : 2 lumens / 12days
Mode 2: 40 lumens / 5days
Mode 3: 200 lumens / 18 hrs
Mode 4: 500 lumens / 350mins
Mode 5: 800 lumens / 160mins
Mode 6: 1350 lumens / 157mins
Max beam distance: 500 meters
Peak beam intensity: Lux: 68.000
Waterproof: To IPX-8 standard
Impact resistance: 1.5M
Above data was tested base on ANSI-FL1 standard
Batteries: one 26650 rechargeable batteries(not include)
Dimensions: 140.28mm(length) x 43.5mm(head diameter)
Weight: 185G (without battery)
Turn the light ON/OFF by the side switch. Once you release the switch, the light comes on constant output mode.
Presshold the switch from ON to cycle through all the modes: Mode 1 > Mode 2 >Mode 3 > Mode 4 > Mode 5. Release the switch to select the desired output with mode memory.
Double-click from ON to access Turbo. Double-click again for strobe.
Double-click again for strobe. Another double-click for SOS.
Another double-click for beacon. Single click gets you back to regular mode.
Note there is no mode memory for hidden modes.
Turbo mode steps down to mode 5 when thermal protection kick in to prevent overheating.
When in standby, press-hold the switch for momentary activation (1350 lumens)
Double press and hold the switch for constant 1350 lumens. (Second press-hold within 1.5s) Double-click for instant strobe.
Lock-out mode is accessed by a rapid triple-click of the switch from OFF.
The one XPL-W emitters will flash twice to indicate the lock-out is engaged
Another triple-click re-activates.
Standby indicator flashes when batteries are connected but the light is not on.
A brief green flash of the switch occurs every three seconds.
Please use high drained quality batteries
Please do NOT this light unattened
Please caution when using higher output levels.Light body gets hot when the light is on for long period of time and avoid shinning the beam directly into the eyes. This product is high power device and capable of causing eye damage.
Specifications are subject to change without prior notice. Pleas always refer to our official site for the latest information.
Please caution when using higher output levels. Light body gets hot when the light is on for long period of time and avoid shinning the beam directly into the eyes. This product is high power device and capable of causing eye damage.